ГИБРИДНЫЕ Наноструктурные Материалы

Научно-исследовательская лаборатория

 

 

RU EN

 

СОТРУДНИКИ / ОБОРУДОВАНИЕ / СМИ О НАС

 

 

 

О ЛАБОРАТОРИИ

Сотрудники
Оборудование
СМИ о нас
 

 

 

 

 

 

 

 

 

Эстрин Юрий Захарович

Заведующий лабораторией

 

Научные интересы

Гибридные материалы; наноматериалы; биоматериалы; моделирование; физическое металловедение

 

Контакты

yuri.estrin@monash.edu

 

Окончил Московский инженерно-физический институт. В 1975 году защитил кандидатскую диссертацию в Институте кристаллографии им. А. В. Шубникова АН СССР. В этом академическом институте проработал с 1969 по 1979 год. С 1979 по 1992 год работал в Рейнско-Вестфальском техническом университете Ахена, а также в Техническом университета Гамбург-Харбург. Затем сотрудничал с Университетом Западной Австралии. Сейчас является профессор Университета им. Монаша и возглавляет Лабораторию Гибридных Наноструктурных Материалов НИТУ «МИСиС». Юрий Захарович является одним из инициаторов нового подхода к инжинирингу материалов с использованием геометрических принципов и автором многочисленных работ по различным аспектам современного материаловедения. За достижения в этих областях профессор Эстрин был избран действительным членом Австралийской Академии Наук и почетным доктором Российской Академии Наук и имеет на своем счету такие награды как премия им. Александра фон Гумбольдта, премия им. Штаудингера-Дуррера от Швейцарской Федеральной Высшей Технической Школы в Цюрихe, звание профессора мирового класса от Корейского Министерства Образования, Науки и Техники, и др.

 

Награды

  1. В декабре 2014 г. Ассоциацией им. Гельмгольца (Германия) профессору Ю. З. Эстрину была присвоена премия «Helmholtz International Fellow Award» . Задачей Ассоциации являются исследования, которые способствуют решению глобальных проблем науки, общества и экономики. Премия была учреждена в 2012 году и направлена на укрепление сотрудничества с ведущими мировыми учеными. Этой премией награждаются выдающиеся учёные и научные менеджеры, работающие вне Германии, со значительным опытом исследований и научного руководства международными исследовательскими центрами

  2. 23 июня 2015 г. профессору Ю. З. Эстрину была присвоена награда «Thomson Reuters Scitation Award 2015». Каждые три года на основе данных по цитируемости научных работ компания «Thomson Reuters» выбирает выдающихся австралийских исследователей и их коллективы, которые внесли значительный вклад в одну из одиннадцати областей науки, в том числе в категориях технических, социальных и гуманитарных наук. Профессор Эстрин получил единственную награду, присужденную в этом году в области технических наук. Награда связана с его исследованиями в области интенсивной пластической деформации материалов.

 

Основные публикации

Книги:

  1. Lapovok, R.Y., Estrin, J., 2012, Superplasticity in magnesium alloys by severe plastic deformation, in Advances in wrought magnesium alloys: Fundamentals of processing, properties and applications, eds C Bettles and M Barnett, Woodhead Publishing, Cambridge UK, pp. 144-185.

  2. Estrin, J., Murashkin, M., Valiev, R., 2011, Ultrafine-grained aluminium alloys: processes, structural features and properties, in Fundamentals of aluminium metallurgy, eds Roger N Lumley, Woodhead Publishing, UK, pp. 468-497.

  3. Khaydarov, R., Khaydarov, R., Evgrafova, S., Estrin, J., 2011, Using silver nanoparticles as an antimicrobial agent, in Biodefence - Advanced Materials and Methods for Health Protection, eds Sergey Mikhalovsky and Abdukhakim Khajibaev, Springer, USA, pp. 169-177.

  4. Khaydarov, R.R., Khaydarov, R.A., Gapurova, O., Estrin, Y., Evgrafova, S., Scheper, T., Cho, S.Y., 2009, Antimicrobial effects of silver nanoparticles synthesized by an electrochemical method, in Nanostructured Materials for Advanced Technological Applications, eds Reithmaier, Johann Peter; Petkov, Plamen; Kulisch, Wilhelm; Popov, Cyril, Springer, The Netherlands, pp. 215-218.

  5. Zehetbauer, M.J., Estrin, Y., 2009, Modeling of strength and strain hardening of bulk nanostructured materials, in Bulk nanostructured materials, eds M. J. Zehetbauer and Y. T. Zhu, Wiley-VCH, Weinheim, Germany, pp. 109-136.

  6. Estrin, Y., Zehetbauer, M.J., 2009, Niche applications of bulk nanostructured materials processed by severe plastic deformation, in Bulk Nanostructured Materials, eds Michael.J. Zehetbauer and Yuntian Theodore Zhu, Wiley-VCH, Weinheim, Germany, pp. 635-648.

  7. De Cooman, B., Chen, L., Kim, H.S., Estrin, Y., Kim, S.K., Voswinckel, H., 2009, State-of-the-science of high manganese TWIP steels for automotive applications, in Proceedings of the International Conference on Microstructure and Texture in Steels and other Materials, eds Arunansu Haldar, Satyam Suwas and Debashish Bhattacharjee, Springer, London, UK, pp. 165-183.

  8. Estrin, J., 2007, Modeling of severe plastic deformation: evolution of microstructure, texture and strength, in Integral Materials Modeling: Towards Physics-Based Through Process Models, eds Gunter Gottstein, Wiley-VCH, Weinheim, Germany, pp. 275-284.

  9. Estrin, J., 2007, Modelling of severe plastic deformation: evolution of microstructure, texture and strength, in Integral Materials Modelling. Towards Physics-Based Through-Process Models, eds G. Gottstein, Wiley-VCH, Weinheim, Germany, pp. 275-284.

Статьи:

  1. Jongun Moon, Yuanshen Qi, Elena Tabachnikova, Yuri Estrin, Won-Mi Choi, Soo-Hyun Joo, Byeong-Joo Lee, Aleksey Podolskiy, Mikhail Tikhonovsky, Hyoung Seop Kim. Deformation-induced phase transformation of Co20Cr26Fe20Mn20Ni14 high-entropy alloy during high-pressure torsion at 77 K // Materials Letters (2017)

  2. M. Vargas, S. Lathabai, P.J. Uggowitzer, Y. Qi, D. Orlov, Y. Estrin. Microstructure, crystallographic texture and mechanical behaviour of friction stir processed Mg-Zn-Ca-Zr alloy ZKX50 // Materials Science & Engineering A 685 (2017) 253-264

  3. A.E. Medvedev, A. Neumann, H.P. Ng, R. Lapovok, C.Kasper, T.C. Lowe, V.N. Anumalasetty, Y. Estrin. Combined effect of grain refinement and surface modification of pure titanium on the attachment of mesenchymal stem cells and osteoblast-like SaOS-2 cells // Materials Science and Engineering C 71 (2017) 483–497

  4. Min Ji Jang, Dong-Hyun Ahn, Jongun Moon, Jae Wung Bae, Dami Yim, Jien-Wei Yeh, Yuri Estrin & Hyoung Seop Kim. Constitutive modeling of deformation behavior of high-entropy alloys with face-centered cubic crystal structure // Materials Research Letters. 2017. Vol. 5. N. 5. pp. 350-356

  5. Viktor Y. Piirainen, Yuri Z. Estrin. Topological interlocking as a principle of engineering design in consruction of marine and coastal structures // Journal of Mining Institute. 2017. Vol. 226. P. 480-486 (В.Ю. Пиирайнен, Ю.З. Эстрин. Топологическое самозаклинивание как принцип инженерного дизайна при строительстве морских и прибрежных сооружений // Записки Горного института. 2017. Т. 226. С. 480-486)

  6. Min Ji Jang, Dong-Hyun Ahn, Jongun Moon, Jae Wung Bae, Dami Yim, Jien-Wei Yeh, Yuri Estrin & Hyoung Seop Kim. Constitutive modeling of deformation behavior of high-entropy alloys with face-centered cubic crystal structure // Materials Research Letters (2017)

  7. Yan Beygelzimer, Roman Kulagin, Yuri Estrin, Laszlo S. Toth, Hyoung Seop Kim, Marat I. Latypov. Twist Extrusion as a Potent Tool for Obtaining Advanced Engineering Materials: A Review // Advanced Engineering Materials (2017)

  8. S V Dobatkin, E A Lukyanova, N S Martynenko, N Yu Anisimova, M V Kiselevskiy, M V Gorshenkov, N Yu Yurchenko, G I Raab, V S Yusupov, N Birbilis, G A Salishchev, Y Z Estrin. Strength, corrosion resistance, and biocompatibility of ultrafine-grained Mg alloys after different modes of severe plastic deformation // IOP Conf. Series: Materials Science and Engineering. 2017 (194) 012004

  9. Y. Estrin, S.S. Nene, B.P. Kashyap, N. Prabhu, T.Al-Samman. New hot rolled Mg-4Li-Ca alloy: A potential candidate for automotive and biodegradable implant applications // Materials Letters. 173 (2016) 252-256

  10. A. Vinogradov, I.S. Yasnikov, H. Matsuyama, M. Uchida, Y. Kaneko, Y. Estrin. Controlling strength and ductility: Dislocation-based model of necking instability and its verification for ultrafine grain 316L steel // Acta Materialia. 106 (2016) 295-303

  11. Alexander E. Medvedev, Rimma Lapovok, Yuri Estrin, Terry C. Lowe and Venkata N. Anumalasetty. Bending Fatigue Testing of Commercial Purity Titanium for Dental Implants // Advanced Engineering Materials. 2016

  12. Eun Jung Seo, Lawrence Cho, Yuri Estrin, Bruno C. De Cooman. Microstructure-mechanical properties relationships for quenching and partitioning (Q&P) processed steel // Acta Materialia 113 (2016) 124-139

  13. R.Z. Valiev, Y. Estrin, Z. Horita, T.G. Langdon, M.J. Zehetbauer, Y.T. Zhu. Fundamentals of Superior Properties in Bulk NanoSPD Materials // Materials Research Letters.–2016.–V. 4.–N. 1.–P. 1–21. doi: 10.1080/21663831.2015.1060543

  14. Ruslan Z. Valiev, Yuri Estrin, Zenji Horita, Terence G. Langdon, Michael J. Zehetbauer & Yuntian Zhu. Producing Bulk Ultrafine-Grained Materials by Severe Plastic Deformation: Ten Years Later // JOM.–2016.–V. 68 (4) .–P. 1216-1226

  15. A.E. Medvedev, A. Neumann, H.P. Ng, R. Lapovok, C. Kasper, T.C. Lowe, V.N. Anumalasetty, Y. Estrin. Combined effect of grain refinement and surface modification of pure titanium on the attachment of mesenchymal stem cells and osteoblast-like SaOS-2 cells // Materials Science & Engineering C. 2016 (in press)

  16. F.S. Senatovn, K.V. Niaza, M.Yu. Zadorozhnyy, A.V. Maksimkin, S.D. Kaloshkin, Y.Z. Estrin. Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds // Journal of the mechanical behavior of biomedical materials. 57 (2016) 139–148. doi: 10.1016/j.jmbbm.2015.11.036

  17. Yuanshen Qi, Karla G. Contreras, Hyun-Do Jung, Hyoun-Ee Kim, Rimma Lapovok, Yuri Estrin. Ultrafine-grained porous titanium and porous titanium/magnesium composites fabricated by space holder-enabled severe plastic deformation // Materials Science and Engineering C 59 (2016) 754–765. doi: 10.1016/j.msec.2015.10.070

  18. Hyun-Do Jung, Hui-Sun Park, Min-Ho Kang, Yuanlong Li, Hyoun-Ee Kim, Young-Hag Koh, Yuri Estrin. Reinforcement of polyetheretherketone polymer with titanium for improved mechanical properties and in vitro biocompatibility // Journal of biomedical materials research B: Applied biomaterials. 2016. V. 104B, N. 1. P. 141-148

  19. R.Z. Valiev, Y. Estrin, Z. Horita, T.G. Langdon, M.J. Zehetbauer, Y.T. Zhu. Fundamentals of Superior Properties in Bulk NanoSPD Materials // Mater. Res. Lett., 2015. DOI: 10.1080/21663831.2015.1060543

  20. Li Wang, Y., Molotnikov, A., Diez, M., Lapovok, R., Kim, H.-E., Tao Wang, J. Estrin, Y. ‘Gradient structure produced by three roll planetary milling: Numerical simulation and microstructural observations’, Materials Science and Engineering A 639, 165-172 (2015)

  21. A. Vinogradov, I. S. Yasnikov, Y. Estrin. Irreversible thermodynamics approach to plasticity: dislocation density based constitutive modelling // Materials Science and Technology. 2015. V. 31. P. 1664-1672. DOI: 10.1179/1743284715Y.0000000069

  22. S.S. Nene, Y. Estrin, B.P. Kashyap, N. Prabhu, T. Al-Samman, B.J.C. Luthringer, R. Willumeit. Introducing an ultralight, high-strength, biodegradable Mg-4Li-1Ca alloy // Advanced Biomaterials and Devices in Medicine 1 (2015) 32-36

  23. S. Khoddam, Y. Estrin, H.S. Kim, O. Bouaziz. Torsional and compressive behaviours of a hybrid material: Spiral fibre reinforced metal matrix composite // Materials and Design 85 (2015) 404–411. DOI: 10.1016/j.matdes.2015.06.165

  24. Bafekrpour, E, Dyskin, A., Pasternak, E., Moloptnikov, A., Estrin, Y., ‘Internally architectured materials with directionally asymmetric friction’, Scientific Reports, Volume 5, Article number 10732 (2015)

  25. Molotnikov, A., Gerbrand, R., Simon, G.P., Estrin, Y. ‘Design of responsive materials using topologically interlocked elements’, Smart Materials and Structures 24, Issue 2, 1 February 2015, Article number 025034

  26. Nene, S.S., Kashyap, B.P., Prabhu, N., Estrin, Y., Al-Samman, T., ‘Biocorrosion and biodegradation behavior of ultralight Mg–4Li–1Ca (LC41) alloy in simulated body fluid for degradable implant applications’, Journal of Materials Science, 30 January 2015, DOI: 10.1007/s10853-015-8846-y.

  27. Vinogradov, A., Orlov, D., Danyuk, A.,Estrin, Y., ‘Deformation mechanisms underlying tension-compression asymmetry in magnesium alloy ZK60 revealed by acoustic emission monitoring’, Materials Science and Engineering A 621 (2015) 243-251

  28. Beygelzimer, R, Estrin, Y., Kulagin, Synthesis of Hybrid Materials by Severe Plastic Deformation: A New Paradigm of SPD Processing’, Advanced Engineering Materials (2015) DOI: 10.1002/adem.201500083

  29. Jung, H.-D., Park, H.-S., Kang, M.-H., Koh, Y.-H., Estrin, Y. ‘Reinforcement of polyetheretherketone polymer with titanium for improved mechanical properties and in vitro biocompatibility’, Journal of Biomedical Materials Research - Part B Applied Biomaterials DOI: 10.1002/jbm.b.33361

  30. Sergiy V. Divinski, Gerrit Reglitz, Igor S. Golovin, Martin Peterlechner, Rimma Lapovok, Yuri Estrin, Gerhard Wilde. Effect of heat treatment on diffusion, internal friction, microstructure and mechanical properties of ultra-fine-grained nickel severely deformed by equal-channel angular pressing // Acta Materialia. 2014 (11) 1359-6454

  31. Dong Jun Lee, Eun Yoo Yoon, Dong-Hyun Ahn, Byung Ho Park, Hyo Wook Park, Lee Ju Park, Yuri Estrin, Hyoung Seop Kim. Dislocation density-based finite element analysis of large strain deformation behavior of copper under high-pressure torsion // Acta Materialia. 2014 (13) 1359-6454, doi: 10.1016/j.actamat.2014.05.027

  32. T.A. Lebedkina, M.A. Lebyodki, T.T. Lamark, M. Janecek, Y. Estrin. Effect of equal channel angular pressing on the Portevin–Le Chatelier effect in an Al3Mg alloy // Materials Science and Engineering: A. 2014 (7) 0921-5093, doi: 10.1016/j.msea.2013.12.104

  33. Rimma Lapovok, Yuanshen Qi, Hoi Pang Ng, Verena Maier, Yuri Estrin Multicomponent materials from machining chips compacted by equal-channel angular pressing // Journal of Materials Science. 2014 (12) 0022-2461, doi:10.1007/s10853-013-7801-z

  34. Mathilde Diez, Hyoun-Ee Kim, Vladimir Serebryany, Sergey Dobatkin, Yuri Estrin. Improving the mechanical properties of pure magnesium by three-roll planetary milling // Materials Science and Engineering: A. 2014 (6) 0921-5093, doi: 10.1016/j.msea.2013.12.104

  35. S.S. Nene, B.P. Kashyap, N. Prabhu, Y. Estrin, T. Al-Samman. Microstructure refinement and its effect on specific strength and bio-corrosion resistance in ultralight Mg–4Li–1Ca (LC41) alloy by hot rolling // Journal of Alloys and Compounds. 2014 (6) 0925-8388, doi: 10.1016/j.jallcom.2013.12.175

  36. Arcady Dyskin, Elena Pasternak, Yuri Estrin. Topological interlocking as a design principle for hybrid materials // The 8th Pacific Rim International Congress on Advanced Materials and Processing. 2013 (10), doi: 10.1002/9781118792148.ch192

  37. I.S. Yasnikov, A. Vinogradov, Y. Estrin. Revisiting the Considere criterion from the viewpoint of dislocation // Scripta Materialia. 2014 (5) 1359-6462, doi: 10.1016/j.scriptamat.2013.12.009

  38. V. Shterner, A. Molotnikov, I. Timokhina, Y. Estrin, H. Beladi. A constitutive model of the deformation behaviour of twinning induced plasticity (TWIP) steel at different temperatures // Materials Science and Engineering: A. 2014 (8) 0921-5093, doi: 10.1016/j.msea.2013.12.104

  39. A. Vinogradov, I. S. Yasnikov, Y. Estrin. Stochastic dislocation kinetics and fractal structures in deforming metals probed by acoustic emission and surface topography measurements // Journal of Applied Physics. 2014 (10) 0021-8979, doi: 10.1063/1.4884682

  40. Yuanlong Li, Hoi Pang Ng, Hyun-Do Jung, Hyoun-Ee Kim, Yuri Estrin. Enhancement of mechanical properties of grade 4 titanium by equal channel angular pressing with billet encapsulation // Materials Letters. 2014 (4) 0167-577X, doi: 10.1016/j.matlet.2013.12.042

  41. Saurabh Nene, B. P. Kashyap, N. Prabhu, T. Al-Samman, Yuri Estrin. Effect of Rolling on Microstructure and Room Temperature Tensile Properties of Newly Developed Mg-4Li-1Ca alloy // Advanced Materials Research 922 (2014) 537-542 (DOI: 10.4028/www.scientific.net/AMR.922.537)

  42. Ehsan Bafekrpour, Andrey Molotnikov, James C. Weaver, Yves Brechet, Yuri Estrin. Responsive materials: A novel design for enhanced machine-augmented composites // Scientific Reports 2014 (4) Article number 3783, doi:10.1038/srep03783

  43. Dmitry Orlov, Daniele Pelliccia, Xiya Fang, Laure Bourgeois, Nigel Kirby, Andrei Y. Nikulin, Kei Ameyama, Yuri Estrin. Particle evolution in Mg–Zn–Zr alloy processed by integrated extrusion and equal channel angular pressing: Evaluation by electron microscopy and synchrotron small-angle X-ray scattering // Acta Materialia 72 (2014) 110-124 (DOI: 10.1016/j.actamat.2014.03.027)

  44. Yuanlong Li, Hoi Pang Ng, Hyun-Do Jung, Hyoun-Ee Kim, Yuri Estrin. Enhancement of mechanical properties of grade 4 titanium by equal channel angular pressing with billet encapsulation // Materials Letters. 2014. V. 114. P. 144-147 (DOI: 10.1016/j.matlet.2013.09.118)

  45. Rimma Lapovok, Yuanshen Qi, Hoi Pang Ng, Verena Maier, Yuri Estrin. Multicomponent materials from machining chips compacted by equal-channel angular pressing // Journal of Materials Science. 2014. V. 49. N. 3. P. 1193-1204 (DOI: 10.1007/s10853-013-7801-z)

  46. I.S. Yasnikov, A. Vinogradov, Y. Estrin. Revisiting the Considère criterion from the viewpoint of dislocation theory fundamentals // Scripta Materialia. 2014. V. 76. P. 37-40 (DOI: 10.1016/j.scriptamat.2013.12.009)

  47. Kim, J., Estrin, Y., De Cooman, B., 2013, Application of a dislocation density-based constitutive model to Al-alloyed TWIP steel, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science [P], vol 44, issue 9, Springer New York LLC, New York NY USA, pp. 4168-4182.

  48. Bouaziz, O., Kim, H.S., Estrin, Y., 2013, Architecturing of metal-based composites with concurrent nanostructuring: A new paradigm of materials design, Advanced Engineering Materials [P], vol 15, issue 5, Wiley - VCH Verlag GmbH & Co KGaA, Weinheim Germany, pp. 336-340.

  49. Webb, H.K., Boshkovikj, V., Fluke, C.J., Truong, V., Hasan, J., Baulin, V., Lapovok, R.Y., Estrin, Y., Crawford, R.J., Ivanova, E., 2013, Bacterial attachment on sub-nanometrically smooth titanium substrata, Biofouling [P], vol 29, issue 2, Taylor & Francis, Abingdon Oxfordshire UK, pp. 163-170.

  50. Lee, S., Estrin, J., De Cooman, B., 2013, Constitutive Modeling of the Mechanical Properties of V-added Medium Manganese TRIP Steel, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science [P], vol 44, issue 7, Springer New York LLC, New York NY USA, pp. 3136-3146.

  51. Yasnikov, I., Vinogradov, A., Estrin, Y., 2013, Dislocation model for the behavior of fractal dimension of the microstructure of a strained solid, Physics Of The Solid State [P], vol 55, issue 2, M A I K Nauka - Interperiodica, Russian Federation, pp. 346-352.

  52. Orlov, D., Hockauf, M., Myer, L., Estrin, J., 2013, Dynamic properties of an ultrafine-grained Mg-Zn-Zr alloy, Philosophical Magazine Letters [P], vol 93, issue 9, Taylor & Francis, Abingdon England UK, pp. 541-549.

  53. Ribbe, J., Schmitz, G., Gunderov, D., Estrin, J., Amouyal, Y., Wilde, G., Divinski, S., 2013, Effect of annealing on percolating porosity in ultrafine-grained copper produced by equal channel angular pressing, Acta Materialia [P], vol 61, issue 14, Pergamon, Oxford England UK, pp. 5477-5486.

  54. Ribbe, J., Schmitz, G., Rosner, H., Lapovok, R.Y., Estrin, Y., Wilde, G., Divinski, S., 2013, Effect of back pressure during equal-channel angular pressing on deformation-induced porosity in copper, Scripta Materialia [P], vol 68, issue 12, Pergamon, Oxford England UK, pp. 925-928.

  55. Vinogradov, A., Orlov, D., Danyuk, A., Estrin, Y., 2013, Effect of grain size on the mechanisms of plastic deformation in wrought Mg-Zn-Zr alloy revealed by acoustic emission measurements, Acta Materialia [P], vol 61, issue 6, Pergamon-Elsevier Science Ltd, Oxford England UK, pp. 2044-2056.

  56. Estrin, Y., Vinogradov, A., 2013, Extreme grain refinement by severe plastic deformation: A wealth of challenging science, Acta Materialia [P], vol 61, issue 3, Pergamon-Elsevier Science Ltd, Oxford England UK, pp. 782-817.

  57. Kim, S., Jung, H., Kang, M., Kim, H., Koh, Y., Estrin, Y., 2013, Fabrication of porous titanium scaffold with controlled porous structure and net-shape using magnesium as spacer, Materials Science and Engineering C: Biomimetic and Supramolecular Systems [P], vol 33, issue 5, Elsevier S.A., Switzerland, pp. 2808-2815.

  58. Popilevsky, L., Skripnyuk, V.M., Estrin, Y., Dahle, A.K., Gattia, D.M., Montone, A., Rabkin, E., 2013, Hydrogenation-induced microstructure evolution in as cast and severely deformed Mg-10 wt.% Ni alloy, International Journal of Hydrogen Energy [P], vol 38, issue 27, Elsevier Ltd, Camden London UK, pp. 12103-12114.

  59. Carlesso, M., Giacomelli, R., Krause, T., Molotnikov, A., Koch, D., Kroll, S., Tushtev, K., Estrin, Y., Rezwan, K., 2013, Improvement of sound absorption and flexural compliance of porous alumina-mullite ceramics by engineering the microstructure and segmentation into topologically interlocked blocks, Journal of the European Ceramic Society [P], vol 33, issue 13-14, Elsevier Ltd, Camden London UK, pp. 2549-2558.

  60. Ng, H., Haase, C., Lapovok, R.Y., Estrin, Y., 2013, Improving sinterability of Ti-6Al-4V from blended elemental powders through equal channel angular pressing, Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing [P], vol 565, Elsevier S.A., Lausanne Switzerland, pp. 396-404.

  61. Bera, S., Chowdhury, S.G., Estrin, J., Manna, I., 2013, Mechanical properties of Al7075 alloy with nano-ceramic oxide dispersion synthesized by mechanical milling and consolidated by equal channel angular pressing, Journal of Alloys and Compounds [P], vol 548, Elsevier Science SA, Lausanne Switzerland, pp. 257-265.

  62. Estrin, Y., Kim, H., Lapovok, R.Y., Ng, H., Jo, J., 2013, Mechanical strength and biocompatibility of ultrafine-grained commercial purity titanium, BioMed Research International [P], vol 2013, Hindawi Publishing Corporation, New York NY USA, pp. 1-6.

  63. Kang, M., Jung, H., Kim, S., Lee, S., Kim, H., Estrin, Y., Koh, Y., 2013, Production and bio-corrosion resistance of porous magnesium with hydroxyapatite coating for biomedical applications, Materials Letters [P], vol 108, Elsevier BV, Amsterdam The Netherlands, pp. 122-124.

  64. Molotnikov, A., Gerbrand, R., Bouaziz, O., Estrin, Y., 2013, Sandwich panels with a core segmented into topologically interlocked elements, Advanced Engineering Materials [P], vol 15, issue 8, Wiley - V C H Verlag GmbH & Co. KGaA, Weinheim Germany, pp. 728-731.

  65. Zhong, H., Rometsch, P., Estrin, Y., 2013, The influence of Si and Mg content on the microstructure, tensile ductility, and stretch formability of 6xxx alloys, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science [P], vol 44, issue 8, Springer New York LLC, New York NY USA, pp. 3970-3983.

  66. Ahn, D., Kim, H.S., Estrin, J., 2012, A semi-phenomenological constitutive model for hcp materials as exemplified by alpha titanium, Scripta Materialia [P], vol 67, issue 2, Pergamon-Elsevier Science Ltd, Oxford UK, pp. 121-124.

  67. Lapovok, R., Ng, H., Tomus, D., Estrin, J., 2012, Bimetallic copper-aluminium tube by severe plastic deformation, Scripta Materialia [P], vol 66, issue 12, Pergamon-Elsevier Science Ltd, Oxford UK, pp. 1081-1084.

  68. Kim, J., Estrin, J., Beladi, H., Timokhina, I., Chin, K., Kim, S., De Cooman, B., 2012, Constitutive modeling of the tensile behavior of Al-TWIP steel, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science [P], vol 43A, issue 2, Springer, New York USA, pp. 479-490.

  69. Carlesso, M., Molotnikov, A., Krause, T., Tushtev, K., Kroll, S., Rezwan, K., Estrin, J., 2012, Enhancement of sound absorption properties using topologically interlocked elements, Scripta Materialia [P], vol 66, issue 7, Pergamon-Elsevier Science Ltd, Oxford UK, pp. 483-486.

  70. Vinogradov, A., Yasnikov, I., Estrin, J., 2012, Evolution of fractal structures in dislocation ensembles during plastic deformation, Physical Review Letters [P], vol 108, issue 20, American Physical Society, College Pk MD USA, pp. 1-5.

  71. Vinogradov, A., Orlov, D., Estrin, J., 2012, Improvement of fatigue strength of a Mg-Zn-Zr alloy by integrated extrusion and equal-channel angular pressing, Scripta Materialia [P], vol 67, issue 2, Pergamon-Elsevier Science Ltd, Oxford UK, pp. 209-212.

  72. Lapovok, R., Molotnikov, A., Levin, Y., Bandaranayake, A., Estrin, J., 2012, Machining of coarse grained and ultra fine grained titanium, Journal Of Materials Science [P], vol 47, issue 11, Springer, New York USA, pp. 4589-4594.

  73. Krause, T., Molotnikov, A., Carlesso, M., Rente, J., Rezwan, K., Estrin, J., Koch, D., 2012, Mechanical properties of topologically interlocked structures with elements produced by freeze gelation of ceramic slurries, Advanced Engineering Materials [P], vol 14, issue 5, Wiley-VCH, Weinheim Germany, pp. 335-341.

  74. Fagan, T., Das, R., Lemiale, V., Estrin, J., 2012, Modelling of equal channel angular pressing using a mesh-free method, Journal Of Materials Science [P], vol 47, issue 11, Springer, New York USA, pp. 4514-4519.

  75. Dyskin, A.V., Pasternak, E., Estrin, J., 2012, Mortarless structures based on topological interlocking, Frontiers of Structural and Civil Engineering [P], vol 6, issue 2, Springer, Berlin Germany, pp. 188-197.

  76. Haase, C., Lapovok, R.Y., Ng, H., Estrin, J., 2012, Production of Ti-6A1-4V billet through compaction of blended elemental powders by equal-channel angular pressing, Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing [P], vol 550, Elsevier Science SA, Lausanne Switzerland, pp. 263-272.

  77. Yook, S., Jung, H., Park, C., Shin, K., Koh, Y., Estrin, J., Kim, H., 2012, Reverse freeze casting: A new method for fabricating highly porous titanium scaffolds with aligned large pores, Acta Biomaterialia [P], vol 8, issue 6, Elsevier Science Ltd, Oxford UK, pp. 2401-2410.

  78. Molotnikov, A., Lapovok, R.Y., Gu, C., Davies, C.H.J., Estrin, J., 2012, Size effects in micro cup drawing, Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing [P], vol 550, Elsevier Science SA, Lausanne Switzerland, pp. 312-319.

  79. Estrin, J., Ivanova, E., Michalska, A., Truong, V., Lapovok, R., Boyd, R., 2011, Accelerated stem cell attachment to ultrafine grained titanium, Acta Biomaterialia [P], vol 7, issue 2, Elsevier, Oxford UK, pp. 900-906.

  80. Fiebig, J., Divinski, S., Rosner, H., Estrin, J., Wilde, G., 2011, Diffusion of Ag and Co in ultrafine-grained alpha-Ti deformed by equal channel angular pressing, Journal Of Applied Physics [P], vol 110, issue 8, American Institute of Physics, USA, pp. 1-8.

  81. Orlov, D., Ralston, K., Birbilis, N., Estrin, J., 2011, Enhanced corrosion resistance of Mg alloy ZK60 after processing by integrated extrusion and equal channel angular pressing, Acta Materialia [P], vol 59, issue 15, Pergamon-Elsevier Science Ltd, Oxford UK, pp. 6176-6186.

  82. Lemiale, V., Estrin, J., Kim, H., O'donnell, R., 2011, Forming nanocrystalline structures in metal particle impact, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science [P], vol 42A, issue 10, Springer New York LLC, USA, pp. 3006-3012.

  83. Estrin, J., Lemiale, V., O'Donnell, R., Toth, L., 2011, On homogeneous nucleation of dislocation loops in nanocrystalline materials, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science [P], vol 42, issue 13, Springer New York LLC, New York USA, pp. 3883-3888.

  84. Beladi, H., Timokhina, I., Estrin, J., Kim, J., De Cooman, B., Kim, S., 2011, Orientation dependence of twinning and strain hardening behaviour of a high manganese twinning induced plasticity steel with polycrystalline structure, Acta Materialia [P], vol 59, issue 20, Pergamon-Elsevier Science Ltd, Oxford UK, pp. 7787-7799.

  85. Golovin, I., Zadorozhnyy, V., Andrianova, T., Estrin, J., 2011, Relaxation and hysteresis internal friction in ultra-fine-grained copper at temperatures of up to 400oC, Bulletin of the Russian Academy of Sciences: Physics [P], vol 75, issue 10, Allerton Press Inc, New York USA, pp. 1290-1299.

  86. Kolyvanov, E., Kobelev, N., Estrin, J., 2011, Shear modulus and internal friction in a Cu-0.17% alloy and pure copper subjected to equal-channel angular pressing, Russian Metallurgy (Metally) [P], vol 2011, issue 4, MAIK Nauka/Interperiodica/Pleiades Publishing Ltd, Moscow Russian Federation, pp. 279-284.

  87. Estrin, J., Fomenko, L., Lubenets, S., Rusakova, A., 2011, Structural homogeneity and low-temperature micromechanical properties of ultrafine-grained AZ31 magnesium alloy, Low Temperature Physics [P], vol 37, issue 6, American Institute of Physics, USA, pp. 538-543.

  88. Zuberova, Z., Sabirov, I., Estrin, J., 2011, The effect of deformation processing on tensile ductility of magnesium alloy AZ31, Kovove Materialy [P], vol 49, issue 1, Redakcia Kovove Materialy, Slovakia, pp. 29-36.

  89. Czerwinski, A., Lapovok, R., Tomus, D., Estrin, J., Vinogradov, A., 2011, The influence of temporary hydrogenation on ECAP formability and low cycle fatigue life of CP titanium, Journal of Alloys and Compounds [P], vol 509, issue 6, Elsevier Science SA, Switzerland, pp. 2709-2715.

  90. Estrin, J., Dyskin, A., Pasternak, E., 2011, Topological interlocking as a material design concept, Materials Science and Engineering C: Biomimetic and Supramolecular Systems [P], vol 31, issue 6, Elsevier Science BV, The Netherlands, pp. 1189-1194.

  91. Divinski, S., Reglitz, G., Rosner, H., Estrin, J., Wilde, G., 2011, Ultra-fast diffusion channels in pure Ni severely deformed by equal-channel angular pressing, Acta Materialia [P], vol 59, issue 5, Pergamon-Elsevier Science Ltd, Oxford UK, pp. 1974-1985.

  92. Toth, L., Estrin, J., Lapovok, R., Gu, C., 2010, A model of grain fragmentation based on lattice curvature, Acta Materialia [P], vol 58, issue 5, Elsevier, England, UK, pp. 1782-1794.

  93. Khaydarov, R., Khaydarvo, R., Gapurova, O., Estrin, J., 2010, A novel method of continuous fabrication of aqueous dispersions of silver nanoparticles, International Journal of Nanoparticles [P], vol 3, issue 1, Inderscience Enterprises Ltd, Switzerland, pp. 77-91.

  94. Bouaziz, O., Estrin, J., Brechet, Y., Embury, J., 2010, Critical grain size for dislocation storage and consequences for strain hardening of nanocrystalline materials, Scripta Materialia [P], vol 63, issue 5, Elsevier Ltd, Oxford, England, UK, pp. 477-479.

  95. Toth, L., Beausir, B., Gu, C., Estrin, J., Scheerbaum, N., Davies, C., 2010, Effect of grain refinement by severe plastic deformation on the next-neighbor misorientation distribution, Acta Materialia [P], vol 58, issue 20, Elsevier Pergamon, England, UK, pp. 6706-6716.

  96. Bouaziz, O., Allain, S., Estrin, J., 2010, Effect of pre-strain at elevated temperature on strain hardening of twinning-induced plasticity steels, Scripta Materialia [P], vol 62, issue 9, Elsevier Ltd, UK, pp. 713-715.

  97. Estrin, J., Vinogradov, A., 2010, Fatigue behaviour of light alloys with ultrafine grain structure produced by severe plastic deformation: An overview, International Journal of Fatigue [P], vol 32, issue 6, Elsevier Ltd, England, UK, pp. 898-907.

  98. Lemiale, V.J., Estrin, J., Kim, H.S., O'donnell, R., 2010, Grain refinement under high strain rate impact: A numerical approach, Computational Materials Science [P], vol 48, issue 1, Elsevier Science BV, Amsterdam Netherlands, pp. 124-132.

  99. Skripnyuk, V.M., Rabkin, E., Bendersky, L.A., Magrez, A., Carreno-Morelli, E., Estrin, J., 2010, Hydrogen storage properties of as-synthesized and severely deformed magnesium - multiwall carbon nanotubes composite, International Journal of Hydrogen Energy [P], vol 35, issue 11, Pergamon-Elsevier Science Ltd, England, UK, pp. 5471-5478.

  100. Orlov, D., Raab, G., Lamark, T., Popov, M., Estrin, Y., 2010, Improvement of mechanical properties of magnesium alloy ZK60 by integrated extrusion and equal channel angular pressing, Acta Materialia [P], vol 59, issue 1, Elsevier Pergamon, UK, pp. 375-385.

  101. Kanel-Belov, A., Dyskin, A., Estrin, J., Pasternak, E., Ivanov-Pogodaev, I., 2010, Interlocking of convex polyhedra: towards a geometric theory of fragmented solids, Moscow Mathematical Journal [P], vol 10, issue 2, Independent University of Moscow, Russia, pp. 337-342.

  102. Abrosimova, G., Afonikova, N., Estrin, J., Kobelev, N., Kolyvanov, E., 2010, Orientation dependence of elastic properties and internal stresses in sub-microcrystalline copper produced by equal channel angular pressing, Acta Materialia [P], vol 58, issue 20, Pergamon-Elsevier Science Ltd, Oxford UK, pp. 6656-6664.

  103. Lapovok, R., Pougis, A., Lemiale, V., Orlov, D., Toth, L., Estrin, J., 2010, Severe plastic deformation processes for thin samples, Journal Of Materials Science [P], vol 45, issue 17, Springer, The Netherlands, pp. 4554-4560.

  104. Bera, S., Zuberova, Z., Hellmig, R., Estrin, Y., Manna, I., 2010, Synthesis of copper alloys with extended solid solubility and nano Al 2O3 dispersion by mechanical alloying and equal channel angular pressing, Philosophical Magazine [P], vol 90, issue 11, Taylor & Francis Ltd, Oxon, England, UK, pp. 1465-1483.

  105. Truong, V., Lapovok, R., Estrin, J., Rundell, S., Wang, J., Fluke, C., Crawford, R., Ivanova, E., 2010, The influence of nano-scale surface roughness on bacterial adhesion to ultrafine-grained titanium, Biomaterials [P], vol 31, issue 13, Elsevier, UK, pp. 3674-3683.

  106. Mukhejee, S., Chakraborty, S., Galun, R., Estrin, Y., Manna, I., 2010, Transport phenomena in conduction mode laser beam welding of Fe-Al dissimilar couple with Ta diffusion barrier, International Journal of Heat and Mass Transfer [P], vol 53, issue 23-24, Elsevier, Uk, pp. 5274-5282.

  107. Divinski, S., Wilde, G., Rabkin, E., Estrin, J., 2010, Ultra-fast atomic transport in severely deformed materials-A pathway to applications?, Advanced Engineering Materials [P], vol 12, issue 8, Wiley-VCH Verlag, Germany, pp. 779-785.

  108. Bouaziz, O., Estrin, J., Kim, H., 2009, A new technique for severe plastic deformation: The cone-cone method, Advanced Engineering Materials [P], vol 11, issue 12, Wiley-VCH, Germany, pp. 982-985.

  109. Estrin, J., Kasper, C., Diederichs, S., Lapovok, R.Y., 2009, Accelerated growth of preosteoblastic cells on ultrafine grained titanium, Physical Review Letters [P], vol 90, WIley, NY, USA, pp. 1239-1242.

  110. Schaare, S., Riehemann, W., Estrin, J., 2009, Damping properties of an assembly of topologically interlocked cubes, Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing [P], vol 521-522, issue 0, Elsevier Science SA, Switzerland, pp. 380-383.

  111. Ma, X., Lapovok, R.Y., Gu, C., Molotnikov, A., Estrin, J., Pereloma, E., Davies, C.H.J., Hodgson, P.D., 2009, Deep drawing behaviour of ultrafine grained copper: Modelling and experiment, Journal Of Materials Science [P], vol 44, issue 14, Springer, The Netherlands, pp. 3807-3812.

  112. Sabirov, I., Barnett, M.R., Estrin, Y., Timokhina, I., Hodgson, P.D., 2009, Deformation mechanisms in an ultra-fine grained Al alloy, International Journal of Materials Research [P], vol 100, issue 12, Carl Hanser Verlag, Germany, pp. 1679-1685.

  113. Truong, V., Rundell, S., Lapovok, R.Y., Estrin, J., Wang, J.Y., Berndt, C.C., Barnes, D.G., Fluke, C.J., Crawford, R.J., Ivanova, E., 2009, Effect of ultrafine-grained titanium surfaces on adhesion of bacteria, Applied Microbiology And Biotechnology [P], vol 83, issue 5, Springer, The Netherlands, pp. 925-937.

  114. Khaydarov, R.A., Khaydarov, R.R., Gapurova, O., Estrin, J., Scheper, T., 2009, Electrochemical method for the synthesis of silver nanoparticles, Journal Of Nanoparticle Research [P], vol 11, issue 5, Springer, The Netherlands, pp. 1193-1200.

  115. Lapovok, R.Y., Tomus, D., Mang, J., Estrin, J., Lowe, T.C., 2009, Evolution of nanoscale porosity during equal-channel angular pressing of titanium, Acta Materialia [P], vol 57, issue 10, Elsevier, USA, pp. 2909-2918.

  116. Bolke, T., Bondar, G., Estrin, J., Lebyodkin, M.A., 2009, Geometrically non-linear modeling of the Portevin-Le Chatelier effect, Computational Materials Science [P], vol 44, issue 4, Elsevier, The Netherlands, pp. 1076-1088.

  117. Dobatkin, S.V., Estrin, Y., Zakharov, V., Rostova, T., Ukolova, O., Chirkova, A., 2009, Improvement in the strength and ductility of Al-Mg-Mn alloys with Zr and Sc additions by equal channel angular pressing, International Journal of Materials Research [P], vol 100, issue 12, Carl Hanser Verlag, Germany, pp. 1697-1704.

  118. Skripnyuk, V.M., Rabkin, E., Estrin, Y., Lapovok, R.Y., 2009, Improving hydrogen storage properties of magnesium based alloys by equal channel angular pressing, International Journal of Hydrogen Energy [P], vol 34, issue 15, Elsevier Ltd, USA, pp. 6320-6324.

  119. Lebyodkin, M.A., Lebedkina, T.A., Chmelik, F., Lamark, T.T., Estrin, J., Fressengeas, C., Weiss, J., 2009, Intrinsic structure of acoustic emission events during jerky flow in an Al alloy, Physical Review B - Condensed Matter and Materials Physics [P], vol 79, issue 17, American Physical Society, USA, pp. 174114-1-174114-6.

  120. Divinski, S., Ribbe, J., Baither, D., Schmitz, G., Reglitz, G., Rosner, H., Sato, K., Estrin, J., Wilde, G., 2009, Nano- and micro-scale free volume in ultrafine grained Cu-1 wt.%Pb alloy deformed by equal channel angular pressing, Acta Materialia [P], vol 57, issue 19, Elsevier, US, pp. 5706-5717.

  121. Kim, j., Chen, L., Kim, H., Kim, S., Estrin, J., De Cooman, B., 2009, On the tensile behavior of high-manganese twinning-induced plasticity steel, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science [P], vol 40, issue 13, Springer, Boston, MA, USA, pp. 3147-3158.

  122. Divinski, S., Ribbe, J., Reglitz, G., Estrin, J., Wilde, G., 2009, Percolating network of ultrafast transport channels in severely deformed nanocrystalline metals, Journal Of Applied Physics [P], vol 106, American Institute of Physics, USA, pp. 063502-063502-8.

  123. Kashyap, B.P., Hodgson, P.D., Estrin, Y., Timokhina, I., Barnett, M.R., Sabirov, I., 2009, Plastic flow properties and microstructural evolution in an ultrafine-grained Al-Mg-Si alloy at elevated temperatures, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science [P], vol 40, issue 13, Springer, USA, pp. 3294-3303.

  124. Lapovok, R.Y., Toth, L.S., Molinari, A., Estrin, Y., 2009, Strain localisation patterns under equal-channel angular pressing, Journal of the Mechanics and Physics of Solids [P], vol 57, issue 1, Elsevier, USA, pp. 122-136.

  125. Kim, j., Chen, L., Kim, H., Kim, S., Kim, G., Estrin, J., De Cooman, B., 2009, Strain rate sensitivity of C-alloyed, high-Mn, twinning-induced plasticity steel, Steel Research International [P], vol 80, issue 7, Verlag Stahleishen MBH, Germany, pp. 493-498.

  126. Lapovok, R.Y., Estrin, J., Williams, T., 2009, Superplastic failure mode in ultrafine grained magnesium alloy AZ31, International Journal of Materials Research [P], vol 100, issue 4, Carl Hanser Verlag, Germany, pp. 609-613.

  127. Sabirov, I., Barnett, M.R., Estrin, J., Hodgson, P.D., 2009, The effect of strain rate on the deformation mechanisms and the strain rate sensitivity of an ultra-fine-grained Al alloy, Scripta Materialia [P], vol 61, issue 2, Pergamon-Elsevier Science Ltd, England, UK, pp. 181-184.

  128. Estrin, Y., Fomenko, V.S., Grigorova, T.V., Isaev, N.V., Pustovalov, V.V., Shumilin, S.E., Janecek, M., 2009, The effect of the superconducting transition on plastic deformation of ultrafine-grained aluminum, Advanced Engineering Materials [P], vol 11, issue 1-2, Wiley VCH, Weinheim, Germany, pp. 9-15.

  129. Estrin, Y.Z., Isaev, N.V., Grigorova, T.V., Pustovalov, V.V., Fomenko, V.S., Shumilin, S.E., 2009, The plastic deformation of ultrafine grained aluminum at 0.52 K, Crystallography Reports [P], vol 54, issue 6, Pleiades Publishing Inc, Russia, pp. 1043-1050.

  130. Hellmig, R.J., Janecek, M., Hadzima, B., Gendelman, O.V., Shapiro, M.J., Molodova, X., Springer, A., Estrin, J., 2008, A portrait of copper processed by equal channel angular pressing, Materials Transactions, vol 49, issue 1, The Japan Institute of Metals, Sendai, Japan, pp. 31-37.

  131. Wang, H., Estrin, J., Zuberova, Z., 2008, Bio-corrosion of a magnesium alloy with different processing histories, Materials Letters, vol 62, Elsevier, Oxford, UK, pp. 2476-2479.

  132. Op't Hoog, C., Birbilis, N., Estrin, J., 2008, Corrosion of pure Mg as a function of grain size and processing route, Advanced Engineering Materials, vol 10, issue 6, Wiley, Germany, pp. 579-582.

  133. Lapovok, R.Y., Estrin, J., Popov, M.V., Langdon, T.G., 2008, Enhanced superplasticity in a magnesium alloy processed by equal-channel angular pressing with a back-pressure, Advanced Engineering Materials, vol 10, issue 5, Wiley-VCH Verlag, Weinheim, Germany, pp. 429-433.

  134. Lapovok, R.Y., Estrin, J., Popov, M.V., Rundell, S., Williams, T.B., 2008, Enhanced superplasticity of magnesium alloy AZ31 obtained through equal-channel angular pressing with back-pressure, Journal of Materials Science, vol 43, issue 23-24, Kluwer Academic Publishers, Dordrecht, Netherlands, pp. 7372-7378.

  135. Sabirov, I., Estrin, J., Barnett, M.R., Timokhina, I., Hodgson, P.D., 2008, Enhanced tensile ductility of an ultra-fine-grained aluminum alloy, Scripta Materialia, vol 58, issue 3, Pergamon - Elsevier Science Ltd, Oxford UK, pp. 163-166.

  136. Estrin, J., Formenko, L., Lubenets, S.V., Shumilin, S.E., Pustovalov, V.V., 2008, Investigation of structural inhomogeneity and low-temperature micromechanical properties of ultrafinegrained aluminum, Low Temperature Physics, vol 34, issue 9, ILTPE, Ukraine, Europe, pp. 975-982.

  137. Estrin, J., Isaev, N.V., Grigorova, T.V., Pustovalov, V.V., Fomenko, V.S., Shumilin, S.E., Braude, I.S., Malykhin, S.V., Reshetnyak, M.V., Janecek, M., 2008, Low-temperature plastic strain of ultrafine-grain aluminum, Low Temperature Physics, vol 34, issue 8, ILTPE, Ukraine, pp. 665-671.

  138. Estrin, J., Yi, S.B., Brokmeier, H., Zuberova, Z., Yoon, S.C., Kim, H.S., Hellmig, R.J., 2008, Microstructure, texture and mechanical properties of the magnesium alloy AZ31 processed by ECAP, Interntional Journal of Materials Research, vol 99, issue 01, Carl Hanser Verlag, Munich, Germany, pp. 50-55.

  139. Schaare, S., Dyskin, A.V., Estrin, J., Arndt, S., Pasternak, E., Kanel-Belov, A.J., 2008, Point loading of assemblies of interlocked cube-shaped elements, International Journal of Engineering Science, vol 46, issue 12, Elsevier, Oxford, UK, pp. 1228-1238.

  140. Zhu, Y., Estrin, J., Langdon, T.G., Liao, X., Lowe, T.C., Valiev, R.Z., 2008, Preface, Journal of Materials Science, vol 43, issue 23-24, Springer, The Netherlands, pp. 7255-7256.

  141. Molotnikov, A., Lapovok, R.Y., Davies, C.H.J., Cao, W., Estrin, J., 2008, Size effect on the tensile strength of fine-grained copper, Scripta Materialia, vol 59, issue 11, Elsevier, Oxford, UK, pp. 1182-1185.

  142. Estrin, J., Molotnikov, A., Davies, C.H.J., Lapovok, R.Y., 2008, Strain gradient plasticity modelling of high-pressure torsion, Journal of the Mechanics and Physics of Solids, vol 56, issue 4, Pergamon-Elsevier Science Ltd, Oxford, UK, pp. 1186-1202.

  143. Kim, H.S., Estrin, J., 2008, Strength and strain hardening of nanocrystalline materials, Materials Science and Engineering: A, vol 483-484, issue 1-2 C, Elsevier Science SA, Switzerland, pp. 127-130.

  144. Op't Hoog, C., Birbilis, N., Zhang, M., Estrin, J., 2008, Surface grain size effects on the corrosion of magnesium, Key Engineering Materials, vol 384, Trans Tech Publications Ltd, Switzerland, pp. 229-240.

  145. Kobolev, N., Kolyvanov, E., Estrin, J., 2008, Temperature dependence of sound attenuation and shear modulus of ultra fine grained copper produced by equal channel angular pressing, Acta Materialia, vol 56, issue 7, Elsevier, Oxford, UK, pp. 1473-1481.

  146. Sabirov, I., Estrin, J., Barnett, M.R., Timokhina, I., Hodgson, P.D., 2008, Tensile deformation of an ultrafine-grained aluminium alloy: Micro shear banding and grain boundary sliding, Acta Materiaia, vol 56, issue 10, Elsevier, Oxford, UK, pp. 2223-2230.

  147. Estrin, J., Kim, H.S., Nabarro, F.R.N., 2007, A comment on the role of Frank-Read sources in plasticity of nanomaterials, Acta Materialia, vol 55, issue 19, Pergamon - Elsevier Science Ltd, Oxford, UK, pp. 6401-6407.

  148. Estrin, J., 2007, Constitutive modelling of creep of metallic materials: Some simple recipes, Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing [P], vol 463, issue 1-2, Elsevier, Switzerland, pp. 171-176.

  149. Dunlop, J., Brechet, Y., Legras, L., Estrin, J., 2007, Dislocation density-based modelling of plastic deformation of Zircaloy-4, Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing [P], vol 443, issue 1-2, Elsevier, Switzerland, pp. 77-86.

  150. Zuberova, Z., Estrin, J., Lamark, T., Janecek, M., Hellmig, R., Krieger, M., 2007, Effect of equal channel angular pressing on the deformation behaviour of magnesium alloy AZ31 under uniaxial compression, Journal of Materials Processing Technology [P], vol 184, issue 1-3, Elsevier, Switzerland, pp. 294-299.

  151. Zuberova, Z., Kunz, L., Lamark, T., Estrin, J., Janecek, M., 2007, Fatigue and tensile behavior of cast, hot-rolled, and severely plastically deformed AZ31 magnesium alloy, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science [P], vol 38 A, issue 9, Springer, New York USA, pp. 1934-1940.

  152. Mercier, A., Molinari, A., Estrin, J., 2007, Grain size dependence of strength of nanocrystalline materials as exemplified by copper: an elastic-viscoplastic modelling approach, Journal of Materials Science, vol 42, issue 5, Springer, New York, USA, pp. 1455-1465.

  153. Hellmig, R., Lamark, T., Popov, M.V., Janecek, M., Estrin, J., Chmelik, F., 2007, Influence of equal-channel angular pressing on the acoustic emission behaviour of magnesium alloy AZ31 under compression, Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing [P], vol 462, issue 1-2, Elsevier, Switzerland, pp. 111-115.

  154. Estrin, J., Rhee, K., Lapovok, R.Y., Thomson, P.F., 2007, Mechanical behavior of alloy AA6111 processed by severe plastic deformation: Modeling and experiment, Journal of Engineering Materials and Technology - Transactions of the ASME, vol 129, issue 3, ASME - AMER Society Mechanical Engineering, New York, USA, pp. 380-389.

  155. Janecek, M., Popov, M., Krieger, M., Hellmig, R., Estrin, J., 2007, Mechanical properties and microstructure of a Mg alloy AZ31 prepared by equal-channel angular pressing, Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing [P], vol 462, issue 1-2, Elsevier, Switzerland, pp. 116-120.

  156. Hadzima, B., Janecek, M., Estrin, J., Kim, H., 2007, Microstructure and corrosion properties of ultrafine-grained interstitial free steel, Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing [P], vol 462, issue 1-2, Elsevier, Switzerland, pp. 243-247.

  157. Estrin, Y.S., Kim, H.S., 2007, Modelling microstructure evolution towards ultrafine crystallinity produced by severe plastic deformation, Journal of Materials Science, vol 42, issue 21, Springer, New York, USA, pp. 9092-9096.

  158. Reichert, B., Estrin, J., 2007, Modular modelling of stress-strain behaviour of ferritic steel grades in strain rate ranges relevant for automotive crash situations, Steel Research International, vol 78, issue 10-11, Verlag Stahleisen GmbH, Duesseldorf, Germany, pp. 791-797.

  159. Kostka, A., Tak, K., Hellmig, R., Estrin, J., Eggeler, G., 2007, On the contribution of carbides and micrograin boundaries to the creep strength of tempered martensite ferritic steels, Acta Materialia [P], vol 55, issue 2, Elsevier, Oxford UK, pp. 539-550.

  160. Molotnikov, A., Estrin, J., Dyskin, A., Pasternak, E., Kanel-Belov, A., 2007, Percolation mechanism of failure of a planar assembly of interlocked osteomorphic elements, Engineering Fracture Mechanics [P], vol 74, issue 8, Elsevier Ltd, Oxford UK, pp. 1222-1232.

  161. Estrin, Y.S., Janecek, M., Raab, G.I., Valiev, R.Z., Zi, A., 2007, Severe plastic deformation as a means of producing ultra-fine-grained net-shaped micro electro-mechanical systems parts, Metallurgical and Materials Transactions A, vol 38 A, issue 9, Minerals Metals Materials Society, Warrendale, PA, USA, pp. 1906-1909.

  162. Bouaziz, O., Estrin, Y.S., Kim, H.S., 2007, Severe plastic deformation by the cone-cone method: Potential for producing ultrafine grained sheet material, La Revue de etallurgie-CIT, vol 104, issue 6, Revue de Metallurgie, France, pp. 318-322.

  163. Amouyal, Y., Divinski, S., Estrin, Y.S., Rabkin, E., 2007, Short-circuit diffusion in an ultrafine-grained copper-zirconium alloy produced by equal channel angular pressing, Acta Materialia, vol 55, issue 15, Pergamon - Elsevier Science Ltd, Oxford, UK, pp. 5968-5979.

  164. Skripnyuk, V., Buchman, E., Rabkin, E., Estrin, J., Popov, M., Jorgensen, S., 2007, The effect of equal channel angular pressing on hydrogen storage properties of a eutectic Mg-Ni alloy, Journal of Alloys and Compounds [P], vol 436, issue 1-2, Elsevier, Switzerland, pp. 99-106.

  165. Wang, H., Estrin, J., Fu, H., Song, Q., Zuberova, Z., 2007, The effect of pre-processing and grain structure on the bio-corrosion and fatigue resistance of magnesium alloy AZ31, Advanced Engineering Materials, vol 9, issue 19, Wiley - VCH Verlag GMbH, Weinheim, Germany, pp. 967-972.

  166. McKenzie, P.W.J., Lapovok, R.Y., Estrin, J., 2007, The influence of back pressure on ECAP processed AA 6016: Modeling and experiment, Acta Materialia, vol 55, issue 9, Pergamon - Elsevier Science Ltd, Oxford, UK, pp. 2985-2993.

  167. Valiev, R.Z., Zhetbauer, M.J., Estrin, Y.S., Hoeppel, H.W., Ivanisenko, Y., Hahn, H., Wilde, G., Roven, H.J., sauvage, x., Langdon, T.G., 2007, The innovation potential of bulk nanostructured materials, Advanced Engineering Materials, vol 9, issue 7, Wiley - VCH Verlag GMBH, Weinheim, Germany, pp. 527-533.

  168. Pasternak, E., Dyskin, A.V., Estrin, Y.S., 2006, Deformations in transform faults with rotating crustal blocks, Pure and Applied Geophysics, vol 163, issue 9, Birkhauser Verlag Ag, Basel Swtzerland, pp. 2011-2030.

  169. Zi, A., Estrin, Y.S., Hellmig, R.J., Kazakevich, M., Rabkin, E., 2006, Downscaling equal channel angular pressing, Solid State Phenomena, vol 114, Trans Tech Publications, Zurich-Uetikon Switzerland, pp. 265-270.

  170. Estrin, Y.S., Isaev, N.V., Lubenets, S.V., Malykhin, S.V., Pugachov, A.T., Pustovalov, V.V., Reshetnyak, E.N., Fomenko, V.S., Fomenko, L.S., Shumilin, S.E., Janecek, M., Hellmig, R.J., 2006, Effect of microstructure on plastic deformation of Cu at low homologous temperatures, Acta Materialia, vol 54, issue 20, Pergamon-Elsevier Science Ltd, Oxford England, pp. 5581-5590.

  171. Gendelman, O.V., Shapiro, M., Estrin, Y.S., Hellmig, R.J., Lekhtmakher, S., 2006, Grain size distribution and heat conductivity of copper processed by equal channel angular pressing, Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, vol 434, issue 1-2, Elsevier Science SA, Lausanne Switzerland, pp. 88-94.

  172. Estrin, J., Hellmig, R., 2006, Improving the properties of magnesium alloys by equal channel angular pressing, Metal Science And Heat Treatment [P], vol 48, issue 11-12, Springer, New York USA, pp. 504-507.

  173. Krieger, M., Estrin, Y.S., Janecek, M., Niemeyer, M., Paul, S., 2006, Mechanical properties and bake hardening behaviour of two cold rolled multiphase sheet steels subjected to CGL heat treatment simulation, Steel Research International, vol 77, issue 9-10, Verlag Stahleisen GmbH, Dusseldorf Germany, pp. 668-674.

  174. Valiev, R.Z., Estrin, Y.S., Horita, Z., Langdon, T.G., Zehetbauer, M.J., Zhu, Y., 2006, Producing bulk ultrafine-grained materials by severe plastic deformation, JOM - Journal of the Minerals, Metals and Materials Society, vol 58, issue 4, Minerals Metals and Materials Society, Pennsylvania USA, pp. 33-39.

  175. Balogh, L., Gubicza, J., Hellmig, R.J., Estrin, Y.S., Ungar, T., 2006, Thermal stability of the microstructure of severely deformed copper, Zeitschfrift fur Kristallographie [P], vol 2, issue Part 2, Oldenbourg Wissenschaftsverlag, Munich Germany, pp. 381-386.

  176. Kim, H.S., Ryu, W.S., Janecek, M., Baik, S.C., Estrin, Y.S., 2005, Effect of equal channel angular pressing on microstructure and mechanical properties of IF steel, Advanced Engineering Materials, vol 7, issue 1-2, Wiley-VCH Verlag GmbH, Weinheim Germany, pp. 43-46.

  177. Lapovok, R.Y., Cottam, R., Thomson, P.F., Estrin, Y.S., 2005, Extraordinary Superplastic Ductility of Magnesium Alloy ZK60, Journal of Materials Research, vol 20, issue 6, Materials Research Society, Warrendale PA USA, pp. 1375-1378.

  178. Lapovok, R.Y., Dalla Torre, F.H., Sandlin, J.D., Davies, C.H.J., Pereloma, E.V., Thomson, P.F., Estrin, Y.S., 2005, Gradient Plasticity Constitutive Model Reflecting the Ultrafine Micro-Structure Scale: The Case of Severely Deformed Copper, Journal of the Mechanics and Physics of Solids, vol 53, issue 4, Elsevier Ltd., USA, pp. 729-747.

  179. Lebyodkin, M.A., Estrin, Y.S., 2005, Multifractal analysis of the Portevin-Le Chatelier effect: General approach and application to AlMg and AlMg/Al2O3 alloys, Acta Materialia, vol 53, issue 12, Pergamon-Elsevier Science Ltd, Oxford UK, pp. 3403-3413.

  180. Kim, H.S., Estrin, Y.S., 2005, Phase mixture modeling of the strain rate dependent mechanical behavior of nanostructured materials, Acta Materialia, vol 53, issue 3, Pergamon-Elsevier Science Ltd, Oxford UK, pp. 765-772.

  181. Lapovok, R.Y., Thomson, P.F., Cottam, R., Estrin, Y.S., 2005, Processing Routes Leading to Superplastic Behaviour of Magnesium Alloy ZK60, Materials Science and Engineering A, vol 410-411, Elsevier Ltd., USA, pp. 390-393.

  182. Estrin, Y.S., Rabkin, E., Hellmig, R.J., Kazakevich, M., Zi, A., 2005, Severe plastic deformation by solid state infiltration, Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, vol 410-411, Elsevier Science SA, Lausanne Switzerland, pp. 165-168.

  183. Estrin, J., Rabkin, E., Hellmig, R., Kazakevich, M., Zi, A., 2005, Solid state infiltration of porous steel with aluminium by the forcefill process, International Journal of Materials Research [P], vol 10, Carl Hanser Verlag, Germany, pp. 1193-1195.

  184. Lapovok, R.Y., Thomson, P.F., Cottam, R., Estrin, Y.S., 2005, The Effect of Grain refinement by Warm Equal Channel Angular Extrusion on Room Temperature Twinning in Magnesium Alloy ZK60, Journal of Materials Science, vol 40, issue 7, Kluwer Academic Publishers, USA, pp. 1699-1708.

  185. Janecek, M., Hadzima, B., Hellmig, R., Estrin, J., 2005, The influence of microstructure on the corrosion properties of Cu polycrystals prepared by ECAP, Kovove Materialy [P], vol 43, issue 4, Institute of Materials and Machine Mechanics, Slovakia, pp. 258-271.

  186. Dyskin, A.V., Estrin, Y.S., Pasternak, E., Khor, H.C., Kanel-Belov, A.J., 2005, The principle of topological interlocking in extraterrestrial construction, Acta Astronautica, vol 57, issue 1, Pergamon-Elsevier Science Ltd, Oxford UK, pp. 10-21.

  187. Lamark, T.T., Chmelik, F., Estrin, Y.S., Lukac, P., 2004, Cyclic deformation of magnesium alloy investigated by the acoustic emission technique, Journal of Alloys and Compounds, vol 378, issue 1-2, Elsevier Science SA, Lausanne Switzerland, pp. 202-206.

  188. Estrin, Y.S., Gottstein, G., Shvindlerman, L.S., 2004, Diffusion controlled creep in nanocrystalline materials under grain growth, Scripta Materialia, vol 50, issue 7, Pergamon-Elsevier Science Ltd, Oxford UK, pp. 993-997.

  189. Gubicza, J., Nam, N.H., Balogh, L., Hellmig, R.J., Stolyarov, V., Estrin, Y.S., Ungar, T., 2004, Microstructure of severely deformed metals determined by X-ray peak profile analysis, Journal of Alloys and Compounds, vol 378, issue 1-2, Elsevier Science SA, Lausanne Switzerland, pp. 248-252.

  190. Estrin, Y.S., Dyskin, A.V., Pasternak, E., Schaare, S., Stanchits, S., Kanel-Belov, A.J., 2004, Negative stiffness of a layer with topologically interlocked elements, Scripta Materialia, vol 50, issue 2, Pergamon-Elsevier Science Ltd, Oxford UK, pp. 291-294.

  191. Lapovok, R.Y., Thomson, P.F., Cottam, R., Estrin, Y.S., 2004, The effect of warm equal channel angular extrusion on ductility and twinning in magnesium alloy ZK60, Materials Transactions, vol 45, issue 7, Japan Inst Metals, Sendai Japan, pp. 2192-2199.

  192. Baik, S.C., Estrin, Y.S., Kim, H.S., Hellmig, R.J., 2003, Dislocation density-based modeling of deformation behavior of aluminium under equal channel angular pressing, Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, vol 351, issue 1-2, Elsevier Science SA, Lausanne Switzerland, pp. 86-97.

  193. Dyskin, A.V., Estrin, Y.S., Pasternak, E., Khor, H.C., Kanel-Belov, A.J., 2003, Fracture resistant structures based on topological interlocking with non-planar contacts, Advanced Engineering Materials, vol 5, issue 3, Wiley-VCH Verlag GmbH, Weinheim Germany, pp. 116-119.

  194. Estrin, Y.S., Kim, H.S., Kovler, M., Berler, G., Shaviv, R., Rabkin, E., 2003, Modeling of aluminum via filling by forcefill, Journal of Applied Physics, vol 93, issue 9, American Institute of Physics, New York NY USA, pp. 5812-5815.

  195. Baik, S.C., Hellmig, R.J., Estrin, Y.S., Kim, H.S., 2003, Modeling of deformation behavior of copper under equal channel angular pressing, Zeitschrift fMetallkunde, vol 94, issue 6, Carl Hanser Verlag, Munich Germany, pp. 754-760.

  196. Baik, S.C., Estrin, Y.S., Hellmig, R.J., Jeong, H., Brokmeier, H., Kim, H.S., 2003, Modeling of texture evolution in copper under equal channel angular pressing, Zeitschrift fr Metallkunde, vol 94, issue 11, Carl Hanser Verlag, Munich Germany, pp. 1189-1198.

  197. Ferkel, H., Estrin, Y.S., Blawert, C., Valiev, R.Z., 2003, RF nitriding of severely deformed Armco iron and St2K50, Surface and Coatings Technology, vol 174-175, Elsevier Science SA, Lausanne Switzerland, pp. 1164-1170.

  198. Ferkel, H., Glatzer, M., Estrin, Y.S., Valiev, R.Z., Blawert, C., Mordike, B.L., 2003, RF plasma nitriding of severely deformed iron-based alloys, Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, vol 348, issue 1-2, Elsevier Science SA, Lausanne Switzerland, pp. 100-110.

  199. Skripnyuk, M., Rabkin, E., Estrin, Y.S., Lapovok, R.Y., 2003, The effect of ball milling and equal channel angular pressing on the hydrogen absorption/desorption properties of Mg-4.95 wt% Zn-0.71 wt% Zr (ZK60) alloy, Acta Materialia, vol 52, issue 2, Pergamon-Elsevier Science Ltd, Oxford UK, pp. 405-414.

  200. Estrin, Y.S., Lebyodkin, M.A., 2003, The influence of dispersion particles on the Portevin-Le Chatelier effect: from average particle characteristics to particle arrangement, Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, vol 387-389, Elsevier Science SA, Lausanne Switzerland, pp. 195-198.

  201. Dyskin, A.V., Estrin, Y.S., Kanel-Belov, A.J., Pasternak, E., 2003, Topological interlocking of platonic solids: a way to new materials and structures, Philosophical Magazine Letters, vol 83, issue 3, Taylor and Francis Ltd, Oxon UK, pp. 197-203.

  202. Estrin, Y.S., Dyskin, A.V., Pasternak, E., Khor, H.C., Kanel-Belov, A.J., 2003, Topological interlocking of protective tiles for the space shuttle, Philosophical Magazine Letters, vol 83, issue 6, Taylor and Francis Ltd, Oxon UK, pp. 351-355.

  203. Baik, S.C., Estrin, Y.S., Kim, H.S., Jeong, H., Hellmig, R.J., 2002, Calculation of deformation behaviour and texture evolution during equal channel angular pressing of IF steel using dislocation based modelling of strain hardening, Materials Science Forum, vol 408, issue 4, Trans Tech Publications Ltd, Zurich-Uetikon Switzerland, pp. 697-702.

  204. Dour, G., Estrin, Y.S., 2002, Dislocation motion in crystals with a high Peierls relief : a unified model incorporating the lattice friction and localised obstacles, Journal of Engineering Materials and Technology - Transactions of the ASME, vol 124, issue 1, American Society of Mechanical Engineering, New York NY USA, pp. 7-12.

  205. Dour, G., Estrin, J., 2002, Dislocation motion in crystals with a high peierls relief: a unified model incorporating the lattice friction and localized obstacles, Journal Of Engineering Materials And Technology-Transactions Of The Asme [P], vol 124, issue 7, ASME, USA, pp. 7-12.

  206. Miller, A., Estrin, Y.S., Hu, X., 2002, Magnetic force microscopy of fatigue crack tip region in a 316L austenitic stainless steel, Scripta Materialia, vol 47, issue 7, Pergamon - SElsevier Science Ltd., Oxford UK, pp. 441-446.

  207. Ferkel, H., Glatzer, M., Estrin, Y.S., Valiev, R.Z., 2002, RF plasma nitriding of a severely deformed high alloyed steel, Scripta Materialia, vol 46, issue 9, Pergamon-Elsevier Science Ltd., Oxford UK, pp. 623-628.

  208. Toth, L.S., Molinari, A., Estrin, Y.S., 2002, Strain hardening at large strains as predicted by dislocation based polycrystal model, Journal of Engineering Materials and Technology - Transactions of the ASME, vol 124, issue 1, American Society of Mechanical Engineering, New York NY USA, pp. 71-77.

  209. Toth, L.S., Molinari, A., Estrin, J., 2002, Strain hardening at large strains as predicted by dislocation based polycrystal plasticity model, Journal Of Engineering Materials And Technology-Transactions Of The Asme [P], vol 124, issue 1, ASME, USA, pp. 71-77.

  210. Kim, H.S., Estrin, Y.S., Gutmanas, E.Y., Rhee, C.K., 2001, A constitutive model for densification of metal compacts: the case of copper, Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, vol 307, issue 1-2, Elsevier Science SA, Lausanne Switzerland, pp. 67-73.

  211. Feuerbacher, M., Schall, P., Estrin, Y.S., Brechet, Y., 2001, A constsitutive model for quasicrystal plasticity, Philosophical Magazine Letters, vol 81, issue 7, Taylor and Francis Ltd, London UK, pp. 473-482.

  212. Dyskin, A.V., Estrin, Y.S., Kanel-Belov, A.J., Pasternak, E., 2001, A new concept in design of materials and structures: assemblies of interlocked tetrahedron-shaped elements, Scripta Materialia, vol 44, issue 12, Pergamon-Elsevier Science Ltd, oxford UK, pp. 2689-2694.

  213. Kim, H.S., Estrin, Y.S., Bush, M.B., 2001, Constitutive modelling of strength and plasticity of nanocrystalline metallic materials, Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, vol 316, issue 1-2, Elsevier Science SA, Lausanne Switzerland, pp. 195-199.

  214. Kim, H.S., Estrin, Y.S., 2001, Ductility of ultrafine grained copper, Applied Physics Letters, vol 79, issue 25, American Institute of Physics, New York NY USA, pp. 4115-4117.

  215. Estrin, Y.S., Gottstein, G., Rabkin, E., Shvindlerman, L.S., 2001, Grain growth in thin metallic films, Acta Materialia, vol 49, issue 4, Pergamon-Elsevier Science Ltd, Oxford England, pp. 673-681.

  216. Zhang, S., McCormick, P.G., Estrin, Y.S., 2001, The morphology of Portevin-Le Chatelier bands: Finite element simulation for Al-Mg-Si, Acta Materialia, vol 49, issue 6, Pergamon-Elsevier Science Ltd, Oxford UK, pp. 1087-1094.

  217. Dyskin, A.V., Estrin, Y.S., Kanel-Belov, A.J., Pasternak, E., 2001, Toughening by fragmentation - how topology helps, Advanced Engineering Materials, vol 3, issue 11, Wiley-VCH Verlag GmbH, Berlin Germany, pp. 885-888.

Тезисы

  1. Fagan, T.C., Lemiale, V., Ibrahim, R.N., Estrin, J., 2012, A thermal model of friction stir processing using a particle based method, 4th International Conference on Computational Methods, 25 November 2012 to 28 November 2012, Queensland University of Technology, Brisbane Qld Australia, pp. 1-11.

  2. Golovin, I., Pal-Val, P., Pal-Val, L., Vatazhuk, E., Estrin, J., 2012, The effect of annealing on the internal friction in ECAP-modified ultrafine grained copper, Solid State Phenomena - Internal Friction and Mechanical Spectroscopy, 3 July 2011 - 8 July 2011, Trans Tech Publications Ltd, Switzerland, pp. 289-294.

  3. Zhong, H., Rometsch, P., Estrin, J., 2012, The influence of alloy composition on the microstructure, tensile ductility and formability of 6xxx alloys, ICAA13: 13th International Conference on Aluminum Alloys, 3 June 2012 to 7 June 2012, The Mineral, Metals & Materials Society, Warrandale PA USA, pp. 687-692.

  4. Haase, C., Ng, H., Lapovok, R.Y., Estrin, J., 2012, Ti-6Al-4V billet produced by compaction of BE powders using equal-channel angular pressing, Key Engineering Materials, 5th December 2011 to 7th December 2011, Trans Tech Publications, Switzerland, pp. 301-308.

  5. Molotnikov, A., Lapovok, R., Peng, T., Estrin, J., 2011, Comparison of different extrusion methods for compaction of powders, Materials Science Forum - Nanomaterials by Severe Plastic Deformation: NanoSPD5, 21 March 2011 to 25 March 2011, Trans Tech Publications, Switzerland, pp. 57-62.

  6. Golovin, I., Estrin, J., 2011, Mechanical spectroscopy of ultrafine grained copper, Materials Science Forum - Nanomaterials by Severe Plastic Deformation NanoSPD5, 21 March 2011 to 25 March 2011, Trans Tech Publications, Switzerland, pp. 857-862.

  7. Lapovok, R., Estrin, J., Djugum, R., Lerk, A., 2011, Severe plastic deformation processes with friction induced shear, Materials Science Forum - Nanomaterials by Severe Plastic Deformation: Nano SPD5, 21 March 2011 to 25 March 2011, Trans Tech Publications, Switzerland, pp. 25-30.

  8. Skripnyuk, V., Rabkin, E., Estrin, J., Lapovok, R., 2010, A possible route to making magnesium fit for hydrogen storage in automative applications, Magnesium Technology 2010, 14 February 2010 to 18 February 2010, TMS (The Mineral Metals & Materials Society), USA, p. 15.

  9. Kim, J., Estrin, J., Beladi, H., Kim, S., Chin, K., De Cooman, B., 2010, Constitutive modeling of TWIP steel in uni-axial tension, Materials Science Forum, 2 August 2010 to 8 August 2010, Trans Tech Publications, Switzerland, pp. 270-273.

  10. Dobatkin, S., Estrin, J., Zakharov, V., Rostova, T., Ukolova, O., Chrikova, A., 2010, Structure, strength and ductility of As-cast A1-Mg-Mn-Zr-Sc alloys after equal channel angular pressing, Materials Science Forum, 2 August 2010 to 6 August 2010, Trans Tech Publications, Switzerland, pp. 311-319.

  11. Da Costa Teixeira, J., Brechet, Y., Estrin, J., Hutchinson, C., 2010, The strain hardening behaviour of supersaturated AI-Cu alloys, Proceedings of the 12th International Conference on Aluminium Alloys, 5 September 2010 to 9 September 2010, The Japan Institute of Light Metals, Japan, pp. 536-541.

  12. Lathabai, S., Migeon, R., Tyagi, V., O'Donnell, R.G., Estrin, Y., 2009, Friction stir processing: A technique for microstructural refinement in metallic materials, Materials science forum, 28th June - 1st July 2009, Trans Tech Publications, Switzerland, pp. 63-67.

  13. Estrin, Y., Dyskin, A.V., Pasternak, E., Schaare, S., 2009, Topological interlocking in design of structures and materials, Architectured multifunctional materials, 13th - 17th April, Materials Research Society, USA, pp. 117-129.

  14. Williams, T.B., Lapovok, R.Y., Estrin, J., 2008, Characterisation of ultra fine grained super-plastic magnesium alloy AZ31 by scanning electron microscopy, Through the Looking Glass - The 20th Australian Conference on Microscopy and Microanalysis and the 4th Congress of the International Union of Microbeam Analysis Societies (Proceedings), 10th - 15th February 2008, The Australian Microscopy and Microanalysis Society Inc, Melbourne, Australia, pp. 385-386.

  15. Sabirov, I., Estrin, J., Barnett, M.R., Timokhina, I., Hodgson, P.D., 2008, Deformation behaviour of an ultra-fine grained AI6082 alloy, Materials Science Forum, 18 August 2008 to 22 August 2008, Trans Tech Publications, Switzerland, pp. 703-707.

  16. Brokmeier, H., Gan, W., Zheng, M., Estrin, J., 2008, Development of extrusion and rolling textures during ECAP of Mg-alloys, Materials Science Forum, 18 August 2008 to 22 August 2008, Trans Tech Publications, Switzerland, pp. 748-753.

  17. Serebryany, V.N., Popov, M.V., Gordeev, A.S., Timofeev, V.N., Rokhlin, L.L., Estrin, J., Dobatkin, S.V., 2008, Effect of texture and microstructure on ductility of a Mg-AI-Ca alloy processed by equal channel angular pressing, Materials Science Forum, 18 August 2008 to 22 August 2008, Trans Tech Publications, Switzerland, pp. 375-379.

  18. Lapovok, R.Y., Williams, T., Estrin, J., 2008, Fracture of ultrafine grained magnesium alloy AZ31 under superplastic deformation conditions, 17th European Conference on Fracture, 2nd - 5th September 2008, VUTIUM, Brno, Czech Republic, pp. 1725-1732.

  19. Ribbe, J., Schmitz, G., Amouyal, Y., Estrin, J., Divinski, S., 2008, Grain boundary radiotracer diffusion of Ni in ultra-fine grained Cu and Cu-1wt.% Pb alloy produced by equal channel angular pressing, Materials Science Forum, 18 August 2008 to 22 August 2008, Trans Tech Publications, Switzerland, pp. 380-386.

  20. Kim, J., Chen, L., Kim, H.S., Estrin, J., Kim, S., Kim, G., De Cooman, B., 2008, Strain rate sensitivity of carbon-alloyed, high-Mn, twinning-induced plasticity steels, 1st International Conference on Interstitially Alloyed Steels (IAS2008), 28th September 2008, POSTECH and GIFT, South Korea, pp. 123-129.

  21. Dobatkin, S.V., Estrin, J., Rokhlin, L.L., Popov, M.V., Lapovok, R.Y., Dobatkina, T.V., Timofeev, V.N., Nikitina, N.I., 2008, Structure and properties of Mg-AI-Ca alloy after severe plastic deformation, Materials Science Forum, 18 August 2008 to 22 August 2008, Trans Tech Publications, Switzerland, pp. 559-564.

  22. Estrin, Y.S., 2006, Effects of severe plastic deformation: mechanical properties and beyond, Materials Science Forum, 22 September 2005 to 26 September 2005, Trans Tech Publications Ltd, Zurich-Uetikon Switzerland, pp. 91-98.

  23. Lamark, T., Hellmig, R., Estrin, J., 2006, Mechanical properties of ECAP processed magnesium alloy AS21X, Materials Science Forum, 22 September 2005 to 26 September 2005, Trans Tech Publications, Switzerland, pp. 889-893.

  24. Hadzima, B., Janecek, M., Hellmig, R.J., Kutnyakova, Y., Estrin, Y.S., 2006, Microstructure and corrosion behaviour of ultrafine-grained copper, Materials Science Forum, 22 September 2005 to 26 September 2005, Trans Tech Publications Ltd, Zurich-Uetikon Switzerland, pp. 883-888.

  25. Kim, H.S., Estrin, Y.S., 2003, Modelling mechanical properties of nanocrystalline copper, Materials Science Forum, 2 December 2002 to 4 December 2002, Trans Tech Publications Ltd., Zurich-Uetikon Switzerland, pp. 351-354.

  26. Baik, S.C., Estrin, J., 2002, Calculation of deformation behavior and texture evolution during equal channel angular pressing of IF steel using dislocation based modeling of strain hardening, Texture of Materials, parts 1 and 2, 26th - 30th August 2002, Trans Tech Publication Ltd, Switzerland, pp. 697-702.

  27. Khor, H.C., Dyskin, A.V., Pasternak, E., Estrin, J., Kanel-Belov, A.J., 2002, Integrity and fracture of plate-like assemblies of topologically interlocked elements, Structural Integrity and Fracture, 25th - 27th September 2002, A A Balkema Publishers, The Netherlands, pp. 449-456.

 

 

 

© 2013

Научно-исследовательская лаборатория "ГИБРИДНЫЕ НАНОСТРУКТУРНЫЕ МАТЕРИАЛЫ"

 

г. Москва, Ленинский пр-т, д. 4 Тел.: +7 (495) 638-45-83